-
Description:
Couple of users have reported that values are showing historical values when browsing through sensor cards in app. We had this issue before and it was related to user having old firmware…
-
During the semester we discussed about the latest Ruuvi firmware release? Are there any relevant changes that should be integrated into the modified codebase here?
-
Hi!
Any plans to add RuuviTag support?
It is based on Nordic 52832 chipset and it's used both from companies and hobbyists.
It would be great to compile the .hex file in Arduino IDE, in order t…
-
`$(SDK_ROOT)/components/drivers_nrf/rng/nrf_drv_rng.c \
`
is included twice in bootloader/ruuvitag_b_production/armgcc/Makefile
There seems to be an extraneous
`$(SDK_ROOT)/components/drivers_n…
-
Hi Evangelos,
We have received the permission from Trackcol to download your firmware for the Ruuvi. I would like to compile it using SES but cannot find the sdk_config.h file.
Not being an expert…
-
Hi,
first of all thanks for the great program. My goal is to have my ruuvi gateway (firmware v1.12.4) collect the data from my 6 ruuvi pro sensors (firmware v.3.31.1) and send it to my local server, …
-
There's a new micro bit in town, so would like to know if it's supported/compatible
-
I believe this is a long time issue causing various problems including rapid batter drain.
When monitoring a sensor at -73 dBM, via BLE advertisments (not logged in) the updated seconds ago flashe…
DG12 updated
20 hours ago
-
Various values including advertising_interval, main_loop_interval, ble_tx_power, oversampling and log interval should be configurable by users. This has been requested many times. The current approach…
-
Hello.
I am trying to read a RuuviTag with your program but I get the folllowing info from BLE, where I mostly read the Data[0] field as 85 and not 99 as expected:
```
[D][main.cpp:183] setup(): …