-
Description:
I added 4 RuuviTags to Ruuvi Station Android 2.10.10 by scanning them with NFC, then tried to read internally stored measurements from sensors using GATT sync.
Looking at CSV export…
-
Tasks before creating a release:
- [x] Bleak as default adapter for Linux
- [x] Install Bleak: https://github.com/ttu/ruuvitag-sensor/pull/244
- [x] Set bleak as default adapter: https://github…
-
We need to sniff ruuvitag communication with a working unit / framework so we can see the hardware address and data format.
-
Currently the Firmware only supports Ruuvitags with the following hardware:
- BME280
- LIS2DH12
-
Hi!
Any plans to add RuuviTag support?
It is based on Nordic 52832 chipset and it's used both from companies and hobbyists.
It would be great to compile the .hex file in Arduino IDE, in order t…
-
At the moment, the `GetItems` function seems to be missing too:
```
root@ekrano:~/git/dbus-victron-virtual-test# dbus -y com.victronenergy.temperature.ruuvi_dd4240ee1474 / GetItems
items = {'/Accel…
-
Ruuvitag is a open-source nRF52832 based bluetooth board with temperature, humidity and pressure sensor.
[https://ruuvi.com](https://ruuvi.com/)
[https://github.com/ruuvi](https://github.com/ruuvi)
-
I installed ruuvitag_sensor and RuuviTag-logger and noticed logger cannot handle format 3 data yet.
-
Currently the power usage of the ruuvitag is sitting at between 56 to 60 µA.
Ideally the power usage would be similar to the current Ruuvitag FW which is drawing 20 uA.
-
I am wondering if it would be possible to make this change since [this could present a problem](https://stackoverflow.com/a/71929821) with trying to scan tags with a BT 5.x device.
Not exacly sure …