-
```
[12ms] Platform: ZuluSCSI Pico
[12ms] FW Version: 24.10.16-release Oct 16 2024 17:34:59
[12ms] DIP switch settings: debug log 0, termination 1
[12ms] SCSI termination is enabled
[12ms] Flash …
-
Hi!
I'm using this library with MCUXpresso SDK's LPUART FreeRTOS Driver (API reference [here](https://mcuxpresso.nxp.com/api_doc/dev/3580/a00029.html)).
I implemented the read and write functions wi…
-
### Board
custom esp32s3 board
### Device Description
Custom board with ESP32S3 and FUSB302 chip connected to USB-C port. The problem is unrelated to the board.
### Hardware Configuration
ESP32S3…
-
**Describe the bug**
When reading sensor data using `HAL_UART_Receive()`, the buffer contains two instances of the first start character, 0x42.
This results in frequent checksum failures, possibly d…
-
**Describe the bug**
Bluetooth Host Buffers are allocated for maximum count and maximum buffer size of the ACL RX, or EVT RX or ISO RX counts and sizes.
https://github.com/zephyrproject-rtos/zeph…
-
**Is your enhancement proposal related to a problem? Please describe.**
The current SPI driver transfer API has parameters for an array of struct spi_buf for transmits and another for receive.
The S…
-
**Describe the bug**
Test `tests/drivers/spi/spi_controller_peripheral/drivers.spi.spi_fast` fails.
Observed for `nrf54h20dk@0.9.0/nrf54h20/cpuapp`.
**To Reproduce**
Steps to reproduce the be…
-
My issue was in the zmq_task of the zmq_interface i was using, as it was reading messages and allocating new packets faster than sfp was freeing them...
My hotfix is to introduce a 1ms sleep...:
…
-
### Is your feature request related to a problem? Please describe.
This request relates to problems that can occur for certain hardware/OS combinations when users try to filter the CAN messages com…
-
Hello everyone!
The Sparkfun 9doF Stick won't initialize via I2C throwing up this error:
[ 2464][E][Wire.cpp:422] beginTransmission(): could not acquire lock
[ 2470][E][Wire.cpp:448] endTran…