-
I am new to LIS2HH12 and using SAME54 MCU. Was hoping to get a sample of the code using the i2c from SAME54.
thank you
-
I'm a beginner attemping to port MicroPython to SAME54 (Xplained Pro board).
So I turns out I have to load the required ASF4 stuff for SAME54 to be able to compile.
**Is tools/update_from_atmel_st…
-
### CircuitPython version
```python
CircuitPython version 7.0.0 work fine, volume is up to date after board reset
Installing CircuitPython higher then 7.0.0 all changes on the filesystem are reada…
-
Hi team,
I have been trying to verify the SAME54 Live Update application from the Bootloader_apps_usb section.
The tool provided for flashing is UnifiedHost-1.17.0.jar in bootloader/tools reposito…
ymj7 updated
7 months ago
-
#### Description
When using `mtd_write()` / `mtd_read()`, `0xFF` is read instead of the written buffer.
Adding a hexdump **after** the read / write operation makes the issue go away
```patch
…
-
A communication via UART between STM32WB board and ATSAME54 board is desired. UART communication with DMA would be faster and efficient but ATSAME54 does not have DMA enabled. Adding DMA feature to th…
-
USB example usb_host_msd_bootloader/test_app/firmware/sam_e54_xpro.X/ shows compile error as bellow:
make[2]: *** No rule to make target '..\\src\\config\\sam_e54_xpro\\ATSAME54P20A.ld', needed b…
-
The awesome-embedded-rust list has grown a lot over the last few years and it might be time to think about how we could reorganise the crates to help make it easier to navigate and find the crate you'…
-
Would it be possible to provide the (Windows) binaries for version 1.9?
Thanks!
-
#### Description
sending a group of multiple can frames shows a strange packet reordering issue
#### Steps to reproduce the issue
```
static int _send_fast(int argc, char **argv)
{
(vo…