-
I was looking solid library that enable the Arduino that can communicate to SavvyCAN directly with Lawicel Protocol. Then i saw this repo but don't know how to use with Arduino code. Latest i tried wi…
-
When i want to use my Arduino Nano and MCP2515 8MHz with SavvyCan v208, i need to enter manually the command S2 and O to receive the CAN-Messages.
Can anyone help me?
By using CANable there is …
-
Hi. I'm new to WiCAN, i'm trying to sniff CAN data via SavvyCAN. I'm getting 1 message looped, that's the CAN Gateway on my VW E-Golf. So the data seems ok. But, i'm getting 3000 messages per second, …
-
When using SavvyCAN, Arduino Nano with MCP2515 8MHz I keep getting HEX 07 back when sending dumps.
```
Write to serial -> 74 33 38 32 31 30 30 d (t328100)
Got data from serial. Len = 1
07
-
Using SavvyCAN to transmit CAN frames.
Observed: The transmit frames are shown in SavvyCAN, but are not physically transmitted on the CAN.
Expected: The transmit frames which are shown in SavvyCAN a…
uhi22 updated
5 months ago
-
Hi Adam,
I probably should create a pull request, but I've not got everything set up.
I made a change that you may want to consider, to the save file process that converts to time stamp to ms
Its …
-
I am using windows 11 64 bit. I have a log file in ASC format with a size of about 12mb. When I open the file, the software automatically exits and closes. I tried another way, selecting play back, bu…
-
Thanks for your efforts. I'm using an Espressif ESP32-S3-DevKitC-1 board with a Waveshare SN65HVD230. I have wired everything as mentioned, however, this is all I see in SavvyCAN.
![image](https:…
-
I'm running SavvyCAN-da5e502-x86_64.AppImage on Ubuntu 23.10. The application crashes if I try to load a DBC file. Log below:
```
void@return:~/Documents/software$ GDK_BACKEND=x11 ./SavvyCAN-da5e5…
-
Hi guys
I have been using Savvycan for a while now and find it absolutely brilliant and always reliable when using Arduino Due but I'm trying to set it up with an ESP32 and having issues.
I have sev…