-
I should return the working not defective second msr2 sensor too.
In your wiki/documentation you write about humidity.
https://wiki.apolloautomation.com/books/msr-2/page/msr-2-temperature-humidity…
-
Move power management routines earlier in the task cycle and determine if there is enough power for the cycle to proceed. Current firmware often reports a SCD40 not found error when there is not enoug…
-
Add low power modes to CO2 Gadget,
Starting with SCD41 sensor (not too expensive and widely available).
Nothing too complex but with different low power modes the user can select in preferences:…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hey Ron, were you able to test this with a SCD4x? I've got a SCD40 that I'm unable to get working with node red.
I know the sensor and wiring are good because the supplied test program from Sensiri…
-
Hi guys,
I have received the SCD40 sensor and am very excited about it.
However, I am not sure how to get it running.
I plugged it into the EPL according to the picture from the webstore, re-power…
-
Hi, I cannot seem to get the SCD40 CO2 sensor to work by adding the scd4x component to ESPHome.
https://github.com/EverythingSmartHome/everything-presence-lite/compare/main...danielcecil:everything…
-
Hi, was trying out the QTPY ESP32-S2 and reading the components examples/code and it only supports one i2c interface currently. The spec takes an array, but no idea if the website will let me scan two…
tyeth updated
5 months ago
-
-
I really like the ability to do calibration of the SCD40/41 within the MyAmbiance app. Of course I want to be able to do it with the SCD30 too! Is that possible? If not, do you know of an Arduino s…