-
-
Hi,
I'm the inventor of the [Solder Ninja Pen](https://www.crowdsupply.com/sitron-labs/solder-ninja-pen) and would love to provide backers of the project with the ability to use IronOS instead of t…
-
-
[Reports](https://bytebin.lucko.me/iSAqPU4M6P) ## Please don't post simple questions on this issue tracker!
Simple questions like "How do I do X?" should instead be handled either on the Discussions …
-
## Overview
This issue will track changes to the `v3` power board design to address FOXSI-4 hardware errata, [documented here](https://github.com/foxsi/UMN-boards-FOXSI-4/releases/tag/foxsi-4-flight)…
-
These are issues I found when trying to work with tscircuit this morning:
- [ ] Could not fully route the macrokeypad in the cli repo
- [ ] Sometimes unnecessarily long/complicated routes are c…
-
pip install freetype and pip install PIL don't work.
## Output of ~/virtualpythonenvironment_python2.6/bin/pip install freetype
/home/cmaier/virtualpythonenvironment_python2.6/bin/pip run on Wed Dec …
-
Can you please create a top-level LICENSE.txt which outlines what the real license is for the HW design and the firmware? Currently there are disclaimers and references to a license but no clear licen…
-
At the Institute of Electronics Engineering (where also a few [circuitikz](https://github.com/circuitikz/circuitikz)-developers were located) we designed an open source easy to use [broswer based GUI]…
-
The schematic I'm working on, is a .vlfschem format. ( For VoxelForge Schematic)
Downsides.
* May be slow with larger builds. (22.3 seconds delay currently for generating the trial chambers (mos…