-
* `FREQuency` or `PERiod` for the base clock
* `CHANnel#:NUMerator` and `CHANnel#:DENominator` to set the multiplier for a channel
* `CHANnel#:DELay` to set the delay/phase
* `CHANnel#:WIDth` for t…
-
In embedded EEZ-Flow projects I would like to be able to easily generate code that processes SCPI commands. For this a UI interface is needed to specify the SCPI commands (probably a panel derived fro…
-
Some of the DIO support PWM. Add SCPI commands to configure and enable PWM on individual DIO channels.
-
I was asked to add a help mechanism to list all currently supported scpi commands. Hopefully I haven't overlooked another implementation somewhere. I'd love to hear your thoughts on the approach desc…
-
How much of trouble is to support SCPI commands list in PROGMEM on AVR? Usually, there is not much SRAM on these microcontrollers (in my case 8K) and my SCPI commands list is taking a lots of it and s…
-
Hello everyone,
I am using freshly installed Julia and the last version of the DAQ server from here. When I try to connect to the RP board, it always gives me a timeout error. In the server log, I fo…
-
I recently just learned about this package yesterday and have been really enjoying all of the features. I currently have access to a Keysight N5242B PNAX and got a warning when connecting using the pa…
-
### Use case: Owon HDS200 series scope meter.
In this SCPI dialect, normal commands and queries usually(?) start with a mandatory ":".
Currently `INSTRUMENT.chan.("OFF")` sends `CHAN OFF` to …
-
@BrandonMehlenbacher
>I was thinking about this today about how some instruments are run off of SCPI commands but fall under other categories. For instance, the thorlabs power meter and the newport …
-
Using lxi-tools also for SCPI devices with USB-only connections would be nice.
_So here's an **working** example to make lxi-tools work with USB despite it **not supporting** USB at all:_
I …