-
### Board
ESP32 Dev Board
### Device Description
ESP32 Dev kit.
Micro SD card breakout board (3.3V).
### Hardware Configuration
GPIO 5 connected to CS
GPIO 23 connected to MOSI
GPIO 18 connec…
-
When a SD card is inserted into a board defined SD card port, we should automount it in CircuitPython and make it available over the CP workflow. The SPI or SDIO bus will need to be board defined so i…
-
### Bambu Studio Version
1.9.3.50
### Where is the application from?
Bambu Lab Official website
### OS version
win 11
### Additional system information
_No response_
### Printer
p1s
### How …
-
I believe this is a known issue, but while it is possible to mount a partition on the 1st SD card, it is not possible to save the overlay. As such, the drive needs to be mapped each time the system is…
-
Hi,
There seems to be an issue with transferring bigger files to 512GB SD cards when the Anbernic RG405m is connected to USB (file transfer)
I have tried two 512GBs one Samsung and another Sand…
-
Hello, I found out that some SD-cards could not get mounted-are not recognized.
Device Cheap-Yellow-Display.
I have 2 manufact. Sandisk 16 GB , Intenso 4 GB, the Sanisk card works with the playe…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
Wh…
-
**Describe the bug**
Unable to flash 47US to yi hack v5, light on camera gets stuck on solid yellow and never moves forward. Tried multiple SD cards. Camera works fine after reboot and removing the c…
-
I did a client update on a legion go and it wiped the sd card previously formatted on a steam deck and formatted it into something steam os couldn't use and I had to reformat it on a steam deck (from …
-
I want use [ROC-RK3588S-PC] device.
I was downloaded [ubuntu-24.04-preinstalled-desktop-arm64-roc-rk3588s-pc.img.xz] file from release.
and write image to SD cards [sand disk and samsung ] with …