-
### Describe the issue
Logger: homeassistant.const
Source: helpers/deprecation.py:197
First occurred: November 1, 2024 at 6:17:49 PM (1 occurrences)
Last logged: November 1, 2024 at 6:17:49 PM
…
-
### Describe the issue
Dar all,
I'm facing a really annoying issue with my SUN2000-8KTL-M1.
All sensors became "Unavailable". I didn't notice the problem directly but I'm guessing is might be rel…
-
### Describe the issue
Maximum value of `Batteries Grid charge maximum power` is at `Inverter Max active power` level.
**Causes overheating on the inverter**!!!
Please limit the `Batteries Grid…
-
### Describe the issue
Hi have the Huawei integration running for my 10KTL-M1 and my Luna2000-10-S0 but I don´t get the configuration options for each, as shown [here for the inverter](https://gith…
-
Alles met Homey lijkt te werken maar ik kan geen verbinding meer maken met fusion solar. Seetds foutmelding 999999909 abnormale Abnormaal communicatie tussen beheersysteem en apparatuur. Ik geraak er …
-
Hello,
I have 2 Huawei inverters, I have the information for both of them. My question would be if it's possible to read out the data from the smart meter linked to the inverted as that would give…
-
**EDIT: managed to get it working. by accessing port 502. Leaving this comment here for future reference.
Perhaps it would be a good idea to include combinations of firmware and port numbers that ar…
Rvh91 updated
2 years ago
-
Hello,
I have 2 SUN2000-6KTL inverters connected in cascaded setup: Master that has smartpowermeter + battery has ID=3, and a slave inverter has slaveID=1. The external connection is a Wired dongle…
-
ik heb juist de App #SolarEdge + Growatt TCP modbus # geinstalleerd , maar er komt geen Data binnen van de Huawei inverter
![Solar ](https://github.com/biemond/solaredge.modbus/assets/149077248/7072…
-
Can someone maybe help me. Can't manage to get my Huawei Inverter/Dongle integrated in HA using this integration. As far as I can see i have updates all the firmware and made the right changes in sett…