-
I'm upgrading my project with the SDP810-500Pa sensor. (Previously used the SDP610 without any problems.) So I basically just tryed your library example on a Pololu Astar 32u4 Micro (Arduino micro clo…
-
Since the checks rely on currently somewhat limited mechanisms, it's probably a good idea to start compiling a list of where the checks yield wrong results. This then allows us to more targetly work t…
-
### Board
Frogboard
### Device Description
A regular Frogboard.
### Hardware Configuration
SDA: 21
SCL: 22
### Version
v2.0.4
### IDE Name
Arduino IDE
### Operating Syst…
-
Great job implementing the I2C bitbang mode in ULP! Your repo deserves more stars.
I'm porting the C code of reading the Sensirion SDP8xx digital sensor to HULP I2C bitbang. I'm reading the sensor …
-
purchased an SDP810-500PA today, which uses a 5V voltage and is connected to the SDA and SCL of RP2040, including the previous MS5611 and MP6050. The SDA and SCL pins are connected to three sensors. …
aepub updated
11 months ago
-
**Describe the problem you have/What new integration you would like**
There is currently a sdp3x sensor ( https://esphome.io/components/sensor/sdp3x.html ). As it is written this sensor compone…
-
In `firmware/ventilator-controller-stm32/Core/Src/Pufferfish/Driver/I2C/SDP.cpp`, currently `SDPSensor::readSample(...)` is requesting 6 bytes of data from the SDP differential pressure sensor. Howeve…