-
Hi, this is the problem with my system.
The eve app is showing measurements but the levels are only unknow.
The retrieved data are from: "getAirQualityPPM":{
"topic": "tele/AirQuality/SEN…
-
Hej Urs,
thanks for your code.
I am testing a very similar setup at the moment with an ESP32, SDS011 and the DHT22.
While DHT22 works fine with the DHT library for the ESP32 and we were successful …
-
Aufgrund der mir bisher bekannten Informationen war ich der Annahme, dass der SDS011 für PM2.5 recht zuverlässige Werte im Vergleich zu Profigeräten liefert.
Bei der aktuellen Wetterlage in Nordw…
-
I am relatively new to working with the SDS011. Could you give me a hint on how to wire the Sensor to the lopy?
-
Hi, I do run WEEWX but the SDS011 is connected by WIFI. Is it also possible to implement calls via API (IP address directly) or via Opensensemap (https://api.opensensemap.org/boxes/5f53f10837e925001b6…
-
The sensor SDS011 delivered incorrect measured values. The new sensor now shows this behavior after less than a year. The picture of the measured values shows the behavior best. Every day for a certai…
-
I tried to use both examples with arduino IDE with a Wemos D1 mini with a SDS011.
But where most examples work 'out of the box' both these examples do not work and do give an error during compiling…
-
I was using SDS011.h in multiple places which was giving me issues with multiple declarations of the class SDS011.
-
Hi,
ich hoffe, ich bin hier an der richtigen Stelle mit dem folgenden Problem:
Ich habe heute zu dem bisher laufenden Paar SDS011 & BME280 einen SHT35 hinzugefügt und in der Konfiguration aktivi…
-
Vielen Dank für eure tolle Arbeit. Ich hätte ein par Rückfragen zu den Variablen im csv.
Ist P1 die pm2.5 konzentration und P2 die pm10 Konzentration? Was sollte in den Feldern durP1 und ratioP1 sei…