-
### What type of request is this?
New tool idea
### Clear and concise description of the feature you are proposing
Seagate SMART RAW value calculator
not all smart values are human readable, seg…
-
sas_devices is making incorrect associations of enclosure bays:
```text
root@r620:~# sas_devices -v
Found 2 SAS hosts
Found 1 SAS expanders
Found 23 SAS end devices
Resolved 1 enclosure groups…
-
Hello, thanks for the work on this toolset. I have a system running 8 seagate SAS drives and cannot get spindown to work. I first worked with sdparm and would see it bouncing in and out of idle. I …
-
Servus,
could you please make those outputs compatible?
```
root@backup05 ~ # smartctl -a -n standby /dev/da3
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p9 amd64] (local build)
Copyr…
crpb updated
3 months ago
-
**Describe the bug**
On Seagate Exos 7E8 drives, the Command Timeout value is constantly at 100, while the threshold is 0, which is maybe a bug.
**Expected behavior**
Two 8TB Seagate Exos 7E8 I b…
-
Seagate raw data isn't accurate. Therefore `-v` is required. See https://www.truenas.com/community/threads/seagate-ironwolf-smart-test-raw_read_error_rate-seek_error_rate.68634/post-470741
-
### Problem
Requests from the WebUI to the backend are made to the IP address of the backend, rather than the initiating hostname.
This is typically considered a design flaw for several reasons:…
-
So, I've been trying to figure out why the report consistently shows some rather alarming numbers for Seek Error Health. The drives I'm testing against do not actually list any errors at all, and yet…
-
**Describe the bug**
When deploying PVCs using the Seagate Exos-X CSI driver on Dell ME5024 storage, the CSI driver repeatedly assigns the same LUN (LUN 1) to each PersistentVolume (PV) on different …
agusk updated
1 month ago
-
Need log rotation for ilm.log
[root@node3 seagate_ilm]# pwd
/run/seagate_ilm
[root@node3 seagate_ilm]# df .
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 32705896…