-
Hi, I have my Raymarine (Autohelm )ST7000 autopilot connected to SignalK with NMEA2000 through a Seatalk/SeatalkNG converter.
I believe the autopilots Seatalk messages is translated to NMEA2000 us…
-
Hi Timo,
First of all: thank you so much for the work you've done here!
My goal is to connect our NMEA2000 (Raymarine SeaTalkNG) network to our onboard PC, which is running OpenCPN. I noticed yo…
-
Hello Timo,
First of all thank you very much for all the hard work you did on the NMEA2000 library!
I coupled 2 ESP32 devices to the bus with different IDs and 'was trying tot run the MessageSe…
GWS65 updated
3 years ago
-
Hi,
First of all, thank you for all of the hard work you've put into the NMEA2000 library!
I'm having issues with your due_can fork: https://github.com/ttlappalainen/due_can/ not working on my …
-
Thanks for a good plugin. It works well with $Stalk 0183 outputs, and I can see the reaction to any keypress in the communications debug window.
However, experimenting with the N2000 elements I ha…
-
Readme mentions how the project was tested on several devices.
It would be nice to include a list of them.
Thanks so much for this awesome project.
-
Hello matztam,
I found your Github Side and in your Code a lot of Raymarine Autopilot PNG.
I Only know the Seatalk1 Sentences with Smartpilot S1.
I build a translater from NMEA2000 to NMEA0183 and …
-
### Todo
- [x] Draw up a plan / specification
- [x] Add nodejs & node-red into Venus OS (done see below; not in master yet)
- [x] Add node-red on/off switch to gui; which starts and stops the nod…
-
Controls from Signal K has been discussed before, and post V1, we could start populating this group.
I'm picturing a `controls` group or something along those lines. At this stage we should be able…
-
Hello,
Found these CAN bus transceivers on eBay ([SN65HVD230](http://www.ti.com/lit/ds/symlink/sn65hvd230.pdf)). Will they work with this NMEA200 library?
Thanks,
Michael