-
### Describe the bug
Can someone help with both the config in Esprence GUI and the pinouts used. I cant seem to work it out.
### Version
_No response_
### Active scan enabled
_No response_
### I…
-
Hi!
I wasn't able to open an issue at the [correct repo](https://github.com/muerzi/SEN0395_Lib), so i'm doing it here!
Is it possible to add some more functions for the SEN0395? Actually [others …
-
### The problem
I am trying to use the relatively new dfrobot_sen0395 component. When I try to call dfrobot_sen0395.setting from within a number template set_action code generation completes, but t…
-
I am using your custom component, thank you for sharing it!
I just noticed that in the next release of ESPHome there will finally be official support for the SEN0395:
https://github.com/esphome/…
-
I have 2 EP1 in 2 diffrent locations of my house, as well as a bunch of other ESP based temp sensors. This issue is not related to the calibration or drift but that the sensors seems to be doing somet…
-
I have set up the new Presence One Kit, but Home assistant is not showing any zone controls on the configuration. I have tried, numerous times, to re flash with the beta firmware 1.2.3b, but it only i…
-
After updating all EPL sensors, in setting page I still can see "update available"
![Screenshot 2024-08-03 at 3 09 48 AM](https://github.com/user-attachments/assets/99d36805-b8a5-4c8f-977d-b90c1cd5…
-
Hi guys,
I have an EP light with the SEN0395 and it basically work but the crucial entities are missing in home assisant. I tried many things to import config from ld2450-common.yaml without succes…
-
HS2A43A = SKU:SEN0395
Minimum these four commands are not documented, explained nor implemented in the here provided ".h" / ".cpp" files:
1. "getSensitivity"
2. "getRange"
3. "getLatency"
4. …
-
Hi
I am experiencing an issue with EPL with both SEN0395 or SEN0609 mmWave radars. Sometimes they are stuck with recent status (clear or detected) and become not responsive. LED of the mmWvae sensor…