-
Dear community, is it possible to add the support for [Senseair Sunrise CO2 sensor](https://senseair.com/product/sunrise/)?
The company changed the protocol so the current existing S8 compone…
-
### The problem
I'm using a [SenseAir](https://esphome.io/components/sensor/senseair.html) component with an esp32.
I'm getting the following error:
> 08:26:15][W][senseair:031]: Invalid preamb…
-
### The problem
Senseair sensor is not responding after finally upgrading ESPHome from 2022.3.1 to 2022.12.3. I assume this is because somehow the pause time between the wake up byte and actual paylo…
-
Hello,
First of all, a big thank you for your work !
I made some test with ens16X and scd30 for CO2 and température.
I use climate build.
Neither of them displays the right temperature, it rem…
-
Current code use address 254 (0xFE) for communication. That address is a default MODBUS address only meant to used for test and should not be used in a MODBUS system since multiple units may respond t…
-
Great work, very happy with this solution!
I have a Q350 with an optionbox (connected 2 wired CO2 sensors). Is there any chance I can retreive this values also?
mvkGH updated
4 weeks ago
-
### The problem
@nmaggioni added a great feature on March 19 to be able to have [Background calibration & ABC commands for the SenseAir S8](https://github.com/esphome/esphome/pull/1623).
However i…
-
I'm living in South East Asia where we have air pollution almost all year round. We are using the luftdaten sensors in our school to measure PM2.5. levels indoors and outdoors. In addition to the PM2.…
-
This is truly and awesome project.
To make a real difference to its "competitors" like ESPHome, I would wish for some more sensor support:
| MFR No | Manufacturer | Functions …
-
### The problem
- MH-Z19C CO2 Sensor is connected to ESP32 and integrated in Home Assistant
- Sensor has been outside for 30 Minutes, but it shows 800ppm
- I tried to use a manually triggered Zer…
ar-ml updated
3 months ago