-
Dear community, is it possible to add the support for [Senseair Sunrise CO2 sensor](https://senseair.com/product/sunrise/)?
The company changed the protocol so the current existing S8 compone…
-
I'm living in South East Asia where we have air pollution almost all year round. We are using the luftdaten sensors in our school to measure PM2.5. levels indoors and outdoors. In addition to the PM2.…
-
### The problem
Senseair sensor is not responding after finally upgrading ESPHome from 2022.3.1 to 2022.12.3. I assume this is because somehow the pause time between the wake up byte and actual paylo…
-
### The problem
@nmaggioni added a great feature on March 19 to be able to have [Background calibration & ABC commands for the SenseAir S8](https://github.com/esphome/esphome/pull/1623).
However i…
-
**Describe the problem you have/What new integration you would like**
The senseair s8 (added in esphome/esphome#705) sensor is much appreciated.
One of the benefits of the s8 (vs the mh-z19…
-
Is it possible to implement this? I saw changing the ABC period was possible in the past but due too a bug, it was disabled.
For the Sunrise S11 I saw you could force ABC correction when unit is in f…
-
In [`https://github.com/jcomas/S8_UART/blob/main/examples/co2/co2.cpp`](https://github.com/jcomas/S8_UART/blob/main/examples/co2/co2.cpp), if Senseair S8 isn't connected, the example code is supposed …
-
Current code use address 254 (0xFE) for communication. That address is a default MODBUS address only meant to used for test and should not be used in a MODBUS system since multiple units may respond t…
-
### The problem
- MH-Z19C CO2 Sensor is connected to ESP32 and integrated in Home Assistant
- Sensor has been outside for 30 Minutes, but it shows 800ppm
- I tried to use a manually triggered Zer…
ar-ml updated
3 months ago
-
**Describe the problem you have/What new integration you would like**
I have a DART sensor WZ-S, but I found that ESPHOME currently does not support it.
Please add support for DART WZ-S sensor…