-
Channel 0 RXD ( or TX from the Kickr) seems to follow 7 bytes (correct term?), pause about 0.3 seconds, then 0xA2, pause about 0.6 seconds, another 7 bytes, pause, 0xA2, etc. Edit: though occasionally…
-
The latest version I know is version 1.14. I think there must be a new one for the software 2.3.5676, as this release finally include the support for the second battery tower (twin-tower/Doppelturm). …
HWE70 updated
2 weeks ago
-
Hey all,
I'm trying to design some physical Repairable Ship Components that are basically Arduino's with some kind of sensor combination.
The idea is that within the Mission Script - something c…
-
While Modbus RTU is not currently supported in the protocol, it is possible to extend the system to include this feature.
Current protocol;
```bash
0
```
New protocol:
```bash
0 …
-
### Boards
BW16
### External Hardware
Teensy 4.1 communication via UART
### Hardware Configuration
nothing else attached to BW16
### Version
latest dev (checkout manually)
### …
-
Hello! We are using a payload computer that is powered by the Matrice M30T and and also communicates with the drone using UART for PSDK application using the same cable. The pinout is provided here:
…
-
there seems to be a issue regarding the level property. This has been observed on the mini robot z33 and on the f15.
```py
read: I (2450) gpio: GPIO[34]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pull…
-
On an older 10.9 OSX system I'm not able to build the RS-232 serial console program. I have not bothered to have a closer look at it, because back in the day we used 'cu' for serial connections to oth…
-
Happens on daily & old releases. Connecting via autoconnect then disconnecting and reconnecting restarts connection but it still says Communication Lost. Tested on serial link so far
-
When the ESP is configured before configuring the ESp with a the startup, follwing error will occure:
```
2024-07-23 10:35:28.869 [DEBUG] rosys/hardware/communication/serial_communication.py:72: r…