-
### Board
ESP32 Dev Module Breakout Board (aliexpress version)
### Device Description
I have an ESP32 Wroom Breakout Board and Ethernet Module with W5500 IC connected trough SPI and CS pin attached…
-
Hello friend,
first of all, thanks for the work. I was searching a great icmp library with arduino compatibility a lot of time and your library work flawlessly with Arduino Framework.
¿how can i…
-
**Describe the bug**
When running in client mode, small WebSocket messages sent from the server to the client that can be sent in one ethernet packet work fine. But when the message size is large eno…
-
Because of the way the device handles its serial pins in wnb mode and usb mode, it means that without a hardware toggle, you can’t use the esp32 to end commands if in wnb mode, which is silly. Adding …
-
由于我目前lp4a上sd卡启动似乎有点问题,只使用emmc烧写来进行对系统的更换,在手头想刷个openwrt。
首先参考了https://github.com/ruyisdk/openwrt-th1520/tree/th1520 ,然后编译中出现了kernel编译,缺少dts等一系列问题,在使用了很trick的方法(复制revy老师firmware中的固件和删除kernel中未使用函数,变量这类…
-
after the connection the , code fetches the server and get the success code 200 too , but later one it enters the void loop the "client.connected()" shows false, i.e not connected ... but if i remove…
-
A user writes:
my eshapeoko will be connected via a lantronix ethernet-to-serial converter.
Would you be interested in adding the possibility to connect to a tcp port via QTNetwork (instead of a seri…
-
Hello, I'm using GRBL for an XY scanner without any drill or laser. After about 15 minutes after sending the last command it enters something like a sleep mode, which makes it throw an error when the …
-
### Describe the bug
After updating to `2024.08.14` the following entites become unavailable and are reported as no longer provided by the integration.
I don't see this in the release notes, so is…
-
### Description
### Steps to Reproduce
```
boolean reconnect() {
chipId = ESP.getEfuseMac();
char chipIdString[18];
snprintf(chipIdString, sizeof(chipIdString), "%04X%08X",…