-
implement setpoints incl.
134 BUS DHW Setpoint Analog R/W (target hot water temp, 64.5° would have to be sent as 645)
143 BUS Pool Setpoint Analog R/W (target pool temp, see above for forma…
-
### Prerequisites
* [x] Model name of your Devices: TS0601
### Description
[This "fix" here](https://github.com/KartoffelToby/better_thermostat/blob/31164397db5dd10a4162571da2f1814d1208c24f/c…
-
### Prerequisites
* [x] Model name of your Devices: TS0601_thermostat
### Description
Better Thermostat is overshooting the setpoint by a significant margin with the TS0601_thermostat, `nor…
-
Check if the room temperatures are at or above setpoint every sampling period
If below setpoint, check if the user increased the setpoint in the last X minutes (2x the sampling time)
1. If the use…
-
Hey I get this error in z2m when i change the temperature of a [thermostatic radiator valve](https://www.zigbee2mqtt.io/devices/TRVZB.html)
Matterbridge
`info - [16:38:43.518] [Matterbridge zigbee…
-
### The problem
Hello,
I am reaching out to report a persistent issue with the Netatmo APIs concerning my Energy products, specifically the thermostat and valves, which have been unavailable on Ho…
-
I have this error but only on new sessions after choosing character from character selection:
Message: Action[SetPoint] failed because[SetPoint would result in anchor family connection]: attempted …
-
In apstools v 1.7.0, a new subscription was added that uses the *event_type="setpoint"*. In a real device, this works fine, but for simulated devices this fails because "setpoint" is not a valid event…
-
Core issue: https://github.com/SUPLA/supla-core/issues/470
HVAC will get "TemperatureControlType" user configuration field.
It may be: not supported, room temperature, aux heater/cooler temperatur…
-
The terms "effective setpoint" and "actual setpoint" seems to a lack of consensus on their meaning and/or purpose. Additionally, they are often used interchangeably, leading to potential confusion and…