-
### The problem
After upgrade ESPHOME to version 2023.2.4 - all my Air sensors readings goes minimum values.
Normal values eCO2 before update - between 800-1500ppm
Sensor 1
[10:25:51][D][sgp30:2…
-
Hello,
When I use your update_baseline script, after it sets the baseline, it remains "locked" and stops changing. Is this expected behavior? Shouldn't the baselines continue updating?
Mike
-
**Describe the problem you have/What new integration you would like**
First of all, thanks to everyone who makes this great.
SGP30 has a high current draw (48 mAh) for solar/battery power …
-
* [x] CPython Library - https://github.com/pimoroni/sgp30-python
* [ ] CircuitPython Library - https://github.com/adafruit/Adafruit_CircuitPython_SGP30 *(untested)*
* [ ] Pico
* [x] Pico SDK C++…
-
From the driver integration guide ([link to PDF](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP30_Driver-Integration-Guide_HW_I2C…
-
### The problem
I bought SGP30 sensor, connected it, and after 3 days, it still says: "Baseline reading not available for: 43029s"
Sure, the timer goes down, but when I check it the next day, st…
Pitel updated
7 months ago
-
### The problem
Tried on both Lolin C3 Mini and Espressif official C3-DevKitM-1. Once the SGP30 I2C sensor (tried two different ones) is attached, the device will randomly reboot about 8-10 times a…
-
**Describe the bug**
SGP30 Sensor is not calibrated with the relative humidity therefore the sensor from the output is inaccurate.
**Solution**
After the data from the sensors have been read and …
krogk updated
3 years ago
-
[View Post on Blog](https://allanchain.github.io/blog/post/pi-sgp30)
![pi-sgp30](https://user-images.githubusercontent.com/36528777/236608399-f865a3c2-3982-48e8-aba9-124d43167501.png)
> Connect …
-
After some period of time values of TVOC sensor rises to some unbelievable values - only turn off power supply helps. I also tried another power supply - same problem, could this be problem of this so…