-
I got interested in using 4 of these on my homebuilt CNC and stumbled on this issue regarding using two motors on the same axis, in my case Y and A axis /reversed). I see no sign of this issue being h…
-
I'm unable to make tgFX connect to G2.
I have two Shapeoko 2 routers. One running a TinyG V8 board that works fine with tgfx. I also have a Gsheild and Due that I've been trying to make work on my …
-
Homing work fine with V0.9I no problem (all are NO)
Rewired Z axis and flashed V0.9J.
Z axis limit work great during homing but the X and Y slam into the limit switches.
I checked and the limit inp…
-
```
What steps will reproduce the problem?
1. Buy a Shapeoko which is supposed to be complete off eBay
2. Try to get it assembled, find that it's missing wires, zip ties, mounting
brackets, wires and…
-
shapeoko does this, but limits it to 200%. is that a limitation of grbl?
-
Kurtis Saiyo wrote:
> I was making mating parts that required some better tolerances. When I cut them out with the Shapeoko they were not working out properly after several iterations. What really …
-
Whilst I wait for my F16 PCB and programming dongle to arrive, I have been looking at the GRBL32 source code to be ready to setup and configure my CNC.
- I have Built the code successfully using ST…
-
```
What steps will reproduce the problem?
1. Buy a Shapeoko which is supposed to be complete off eBay
2. Try to get it assembled, find that it's missing wires, zip ties, mounting
brackets, wires and…
-
This is also a standard on shapeoko. Especially useful when doing massive production jobs where the material will be in the same xy position.
-
I put together a walkthrough of this Excellent tool running a Shapeoko 3:
https://www.youtube.com/watch?v=kGbxkIHce9U
Let me know if anything in there is hilariously wrong and I'll try and get it…