-
Requesting support for Shelly Plug S Gen3. Only has FW 1.2.3-matter22 available at the moment as far as I know.
KB link: https://kb.shelly.cloud/knowledge-base/shelly-plug-s-mtr-gen3
Screenshot:…
jenrg updated
3 weeks ago
-
Hello,
i want to use the new Shelly Plug S MTR Gen3 and turn on/off the multicolor led.
Is it possible to add it?
Thanks a lot!
Stefan
-
Shelly Plus Plug S has four WS2812 LEDs in the outer ring.
This template for both LED Strings (each with two WS2812) on GPIO 25 (left half) and 26 Right half) works for me:
` {"NAME":"Shelly Plus Pl…
-
Will the shelly plus plug s, type SNPL-00112EU be supported in the future?
-
Following the `README` unfortunately bricked 2 of my shellys.
Steps to reproduce:
* Connect to shelly, provide wifi-credentials, continue with ip in the lan with internet access
* upgraded vanil…
-
Hi. I'm trying to transition a Shelly PlugUS Gen2 (Shelly firmware 1.4.4) to Tasmota32 using the Sep 30 version of the PlugUS zip file.
I followed the README instructions, and got as far as generat…
-
Hallo zusammen,
funktioniert das Ganze auch mit einer Shelly Plug S?
Problem:
- Um einen Shelly 3EM zu montieren muss man an die Phasen dran. Eine Installation sollte von keinem Laien gemacht we…
-
LS,
In the discription of the flow cards I find: "Reset Energy Total".
But almost none of my devices (Plug, (plus) Plug S, Pro 3EM) have that card. Only the Shelly EM has that card.
Can you also ad…
-
Hello,
I just upgraded to the latest version which introduces the new energy sensors which are great. I actually have each unit connected to a Shelly Plug so that I can measure how much power each …
-
Hello, can you please add these Shelly´s for support, most importantly Shelly Plus Plug S :)
Shelly Plus Plug S
```{"name":null,"id":"shellyplusplugs-3ce90e303dc0","mac":"3CE90E303DC0","model":"S…