-
Since I came from a different project, I have different connections compared to the current one. Specifically, the DB9 pins 1 and 2 are connected to pins 7 and 5 of the Arduino. I have defined the var…
-
Could someone explain why you need a level shifter for this? also what level shifter do you suggest using for this?
-
- **Description**: Verify the functionality of the level shifters between the SNES cartridge and FPGA to ensure proper communication.
- **Priority**: Medium
- **Milestone**: SNESDRONE v2.0 Release
-
**Design:** 25 points
-
**Design:** 50 points
-
Hello everyone,
on some vehicles the automatic shifter fails to shift up and is stuck in a gear during acceleration.
To force it to shift up you have to lift the gas pedal and let the rpm drop a l…
-
I really like the simplicity / compactness of the board, but it would be great it it had these two features:
- Level shifter to bring the data pin to 5v, so I can use it with my [24V RGBW strip](http…
-
### Description
After using the Qdomyos Zwift app for automatic control during Peloton workouts on the Peloton Bike, the shifter no longer works.
### Steps to reproduce
1. Start Peloton Bike …
-
```
#define CAN_INT 9 // INT pin
MCP_CAN CAN(10); // CS pin
Joystick_ Joystick;
```
i get error
```
``\shifter\shifter.ino:32:1:` error: 'Joystick_' does not name a type; did you mean 'Joy…
-
Hey guys :) So i have decided to attempt this project. After piecing together all my parts i am struggling with soldering the 74HC254 chip to the breakout board. I am using 0.6mm solder with a fine ti…