-
Hello,
What modulation is supported by this firmware for APRS?
-
The address fields and the routing fields in the packet header are transmitted in a mixed order.
Expect:
[sender callsign]>[to callsign],[WIDE1-1],[WIDE2-2],:
TRANSMITTED ORDER:
[WIDE2]>[WIDE1-1…
-
Hi!
I trying setup for two modes. HORUS and APRS with custom time schedule. APRS 300 seconds (5 minute) and HORUS 60 seconds (1 minute). I use APRS_TIME_SYNC_SECONDS 300 and HORUS_V2_TIME_SYNC_SECOND…
9A4AM updated
10 months ago
-
The use of OOK mode for sending 4FSK seems to be producing more transmitter sidebands than should be the case.
The code where this is set is here: https://github.com/mikaelnousiainen/RS41ng/blob/main…
-
From VK5QI:
```
Might be worth changing the default SI4032 transmit power in the RS41ng config...
The default of 7 (20 dBm) results in considerably reduced battery life (~12 hours)
25mW is m…
-
Hi, i have RTL-SDR and SDR++ application to see the responce from the radiosonde, i have programmed RS41ng firmware into my radiosonde and i tried to tune my sdr++ to below frequency, but no luck
**…
-
Hi, I am trying to make RS41ng running 12 payloads, with different ID's on the same frequency (intended for a scouting competition)
I don't have enabled continous for either V1 or V2 4fsk, all othe…
zanco updated
10 months ago
-
Hi, I can compile a version which transmits wspr , Horus V2 and FT8 on HF (si5351) but the FT8 signal however is undecodable.
Instead of a normal FT8 transmission there appears an FT8 signal which …
zanco updated
11 months ago
-
Hi!
Get this errors
`root@DESKTOP-4VNP1BN:/RS41ng/build# cmake ..
-- The C compiler identification is GNU 10.2.1
-- The CXX compiler identification is GNU 10.2.1
-- Detecting C compiler ABI info
…
-
To help provide better predictions of radiosondes launches for all the launch sites that appear on the tracker map, we need information on:
What times of the day, and what days of the week radioson…