-
Any idea how and where I can order the AE-Si5351A? It is not possible to order it via the indicated website.
-
https://github.com/adafruit/Adafruit_Si5351_Library/blob/d849003ae9de089ca6883fb71f479c16d2836e83/Adafruit_SI5351.cpp#L477
This library doesn't set DIVBY4 bits of MultiSynth correctly so that any f…
-
The 25MHz crystal used to generate the PCIe and DDR3 clocks is coprime with the desired frequency needed for the USB bootloader (48MHz) which leads to some awkwardness in the PLL configuration. In ret…
-
I noticed the comment on PLL reset in your README.md and thought of an email by Hans G0UPL who uses the SI5351 extensively in several projects. His email goes into depth on the topic:
https://group…
-
I'm trying to build a naive FSK transmitter, by sending 1ms long 'zero' (27.145.900MHz) or 'one' (27.143.000MHz) "bits", and am using the test case:
si5351.set_freq(2714590000ULL, SI5351_PLL_FIXED, …
snout updated
5 years ago
-
Hi! I am testing the library with the SI5351A-B-GM version of the chip. It's the A version with 8 clock outs.
I am using a 25Mhz crystal, specifically this one:
https://www.mouser.mx/ProductDeta…
-
I did not find any information on this topic, so I hope that opening an issue here is the correct way.
From looking at the schematic and the block diagram, I think it should possible to turn off th…
-
Hi!
Can you please share how to connect the gps and the sil5351 to the Arduino Uno r3?
Please.... a wiring diagram would be very great
-
Hi there, Thanks for the great library!
I'm new to python and MicroPython, but I've been messing around with your code, and think I've discovered a bug. It seems that when operating in quadrature …
W3MBG updated
11 months ago
-
Can You add phase shift configuration for outputs ?