-
Recently I found this output of information.
Perhaps it will be useful when researching the original firmware.
```
root@uniview-dev:~# cat /sys/devices/soc0/machine
INFINITY6B0 SSC009A-S01A Q…
-
**The data is obtained on the original firmware**
| Engraving |/sys/class/mstar/msys/CHIP_ID|/sys/devices/soc0/soc_id |/sys/devices/soc0/machine |
|--- |--- …
-
XK found an ffmpeg repo that is targeted at sigmastar that uses mi_vdec to decode instead of the CPU
https://github.com/aaron201912/ffmpeg
Could be useful to optimize our current version.
-
您好,我们公司最近考虑使用sigmastar芯片进行广告屏相关应用开发,在你们官网上也看到了和sigmastar有相应适配,但是没有看到有关视频播放器的相关功能介绍,请问是否支持?具体支持的视频播放相关功能有哪些?谢谢
-
## detail | 详细描述 | 詳細な説明
编译工具链 :gcc-sigmastar-9.1.0-2019.11-x86_64_arm-linux-gnueabihf
使用ncnn默认编译选项在 armv7编译静态库后,链接静态库编译demo。模型是fp32
循环10000次,平均单次运行时间为12ms
![2](https://github.com/Tencent/ncnn/a…
IwraI updated
3 months ago
-
https://openipc.org/cameras/vendors/sigmastar/socs/ssc338q?mac=b6-39-24-f3-8c-5d&cip=192.168.1.112&sip=192.168.1.113&net=both&rom=nand&var=&sd=sd
если по данному линку сгенерировать инструкцию, то в …
-
**问题描述**
你好,我想把 paddle模型转换成 opset=9 的 onnx 模型,但是转换过程中遇到 `nearest_interp_v2` 算子的最小支持版本为 11,该算子理论上可以转换成 opset=9 中的 `Upsample` 算子,不知道是否有方法通过降版本或者其他方式将 paddle 模型转换成 opset=9 的 onnx 模型?如果可以通过降低版本解决问题,我应该…
-
i run command in u-boot
`
setenv loadaddr 0x22000000; dhcp 192.168.1.40:idosom2d01-kernel-rescue.fit; bootm
`
tips:
Wrong Image Format for bootm command
ERROR: can't get kernel image!
![ima…
-
Any plans to include it in the official openwrt release?
-
### Contribution guidelines
- [X] I've read the [contribution guidelines](https://github.com/squidfunk/mkdocs-material/blob/master/CONTRIBUTING.md) and wholeheartedly agree
### I've found a bug and …