-
The sim7000 from default is on auto baud rate. The MCU must transmit some AT after sim7000 reset for sync. Is there a provision for this?
-
Hello!
I have purchased a board from AliExpress (LilyGo-Store) and everything worked fine.
But last week ago, the board stopped reporting values.
A short investigation shows: The SIM7000G does n…
-
Hi
I have a LilyGO-T-SIM7000G I would like to now if its possible to use your library?
Thanks
-
Support Web Configuration UI with WiFi AP.
73!!
-
Hi.
Im using your library (latest) together with tinygsmclient (also latest version) while using sim7000 module.
In general it is working fine but i notice i get disconnects after few minutes of in…
-
I am interested in doing a HTTPS POST or HTTPS PUT for uploading json format data into a Firebase Real-time Datebase. Has anyone had luck with this ?
-
Hi, I have 3 main problems:
1)
When following the [SimCom HTTPS application note](https://www.waveshare.com/w/upload/5/5c/SIM7000_Series_HTTPS_Application_Note_V1.01.pdf) : HTTPS Function, I'm no…
-
I use the DFRobot_SIM7000_UDP sample code, and I meet a big problem that fail to attach service.
I try a lot of function to connect the APN using AT+CSTT, AT+CIICR, AT+CIFSR those AT command, but i s…
-
In TinyGSMClientSim7000SSL.h, modemSend
After writing data to the stream, the code expects the response:
+CASEND, ,,
as per the Sim7000 documentation. The Sim7000 is actually returning:
OK…
-
i cant compile with this library, this is my error msg
`
In file included from C:\Users\murtadho\Documents\Arduino\libraries\DFRobot_SIM7000-master\examples\DFRobot_SIM7000_ATtest\DFRobot_SIM7000…