-
Dear all,
In my application, the ESP32 completely gets stuck after about 1sec. if I short the CAN wires (CAN-J and CAN-L connected).
Unfortunately I couldn't manage to reset the ESP32 as the inter…
-
In [the slcan driver in linux](https://github.com/torvalds/linux/blob/master/drivers/net/can/slcan.c); there is no other flow control than what the tty is offering; ie there is no acks or anything lik…
-
Would it be possible to modify this library to support the ESP32-C3 microcontroller? It has the same CAN controller (SJA1000) as the other ESP32s, but a different, RISC-V based microcontroller. The ex…
-
Hey,
Im not sure about the SJA1000 but the MCP2515 supports multiple filters, however the api of this library does not support multiple filters.
Maybe a macro constant like `MAX_FILTERS` and a fun…
-
Hello,
I have merged the branch j1939d-v4.9.10 into the Debian kernel linux-image-4.9.0-5-amd64 (4.9.65-3 + deb9u2). I have added the rt patches (rt52) and built the kernel with the Debian rt kernel …
-
First of all thank you for this awesome library.
I am getting the following error while trying to run CANSender example on a Firebeetle board with an ESP32-WROOM:
```
The SPI library is intende…
-
Hello :-)
Would it be possible to implement some standard signals concerning CAN bus fault detection?
E.g. Transmit Error Counter (TEC), Receive Error Counter (REC) and the typical CAN bus Error …
-
## Description
I would like to use SocketCAN's `vcan` feature in a Docker container using [Docker for Mac](https://github.com/docker/for-mac/), which is based on LinuxKit.
## Rationale
> …
-
Hi all!
I want to use ESP32 + SN65HVD230 in my car. I can't find good parameters to set CAN bus bitrate to 95 kbps. I already did it for Arduino + MCP2515 and everything works fine, but not for ESP…
-
There does not seem to be a way to create more than a single instance of the CAN object.