-
Hi @catalinii (et all),
Based on the issue #1174 I done this "simple" test:
- Chaining a minisatip instance with two remote tuners (minisatip as well) connected to the same wire.
- Run the "clien…
-
### Description / Steps to reproduce the issue
Hello All,
I am trying to use 2 esp32c6 devkit m, one as master and one as slave.
Slave spi cannot work. I tried solve it by myself but I can't. P…
-
Are there any plans for I2C slave driver? I only found embassy example for I2C slave for rp2040 https://github.com/embassy-rs/embassy/blob/main/examples/rp/src/bin/i2c_slave.rs
Checked the i2c driver…
-
-
Thank you for shared impressive project. I want to used wifi 2.4G/5G , the only esp32c5 compatible.So, I used the esp32-p4 chip for mcu host , and esp32c5 via sdio connected to esp32-p4 sdio port. How…
-
I'm attempting to get the device programmed in ESP-IDF and I can't find the value of CST226SE_SLAVE_ADDRESS. Let alone I can't find any documentation on CST226SE touch controller
-
Starting from I2S slave, I've written a TDM slave implementation.
It still doesn't support sync_len!=1 and offset !=0.
It has been tested for 2, 4 and 8 channels.
[tdm_slave_impl.h.txt](https://gith…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Gradually, we should stop using master/slave like upstream has changed overall. MariaDB has begun the process of adding _primary_ and _replica_ synonyms. MySQL seems to be using _source_ and _replica_…
-
考えがちゃんとまとまっていないので、日本語で。
virtual function であれば関数の引数にすることとができるが、それでは RTL 中で使えない。
* 合成できるか不明
* `always_comb` とかで使う際に、イベントを推定できない(と思う)
Veryl 上で、interface を引数に取る関数を定義した場合、SV に出力する際に interface 中の各…