-
Hi DediProg team,
I recently received a new SF100 programmer and try to connect to my Linux computer, was able to built the software tool but got an issue to connect it.
```
$ ./dpcmd --list
DpC…
-
Make Carrier Board Schematic for SMARC module
**Next Steps:**
- Complete Schematic
- Generate BOM from the complete schematic
- Layout Sysmbol QC
-
I think it would make sense to add some status flags to this message.
I.e Armed/Enabled, Running, Overheating, Too cold, Can't turn, more?
@nilsbore @NiklasRolleberg Ideas? Feedback?
https://gi…
-
Should the glibc version be upgraded to 10u3?
It appears that 10u2 is no longer available and results in a failure to fetch:
WARNING: glibc-2.28-r0 do_fetch: Failed to fetch URL https://security…
-
While digging into DR code at Kristineberg I got some ideas for improvements. I'm noting them here so that we remember them later.
- [ ] Enable running IMU with `_differential` and `_relative` set…
-
-
Many of you are looking for Yocto recipes so here is mine, you can freely use it. It fetches current NG repository, builds esp32_sdio kernel module, configures reboot pin and sets up this module as au…
-
In the page
https://github.com/ADLINK/meta-adlink-rockchip/wiki/01.-Build-Yocto-Image-on-LEC-PX30-with-IPi-SMARC
The BSP_FOLDER variable is used but not defined. I am sure this is the base direc…
rpcme updated
3 years ago
-
The build_scripts is very helpful tool. It looks like it does not cover "tee-xxx.srec". Is there any method to generate "tee-xxx.srec" outside of yocto build system?
-
Currently, the dispute Scanner is using the vote options:
0 = Refuse
1 = Yes
2 = No
But the metadata of each dispute should be used. Since this information it's in the arbitrable smarc contract …