-
[smarthack-mqtt.log](https://github.com/ct-Open-Source/tuya-convert/files/5679146/smarthack-mqtt.log)
[smarthack-psk.log](https://github.com/ct-Open-Source/tuya-convert/files/5679147/smarthack-psk.lo…
-
**Prior to running any command this is what I get running tplight details [ip]**
`"light_state": {`
` "on_off": 1,`
` "mode": "normal",`
` "hue": 261,`
` "saturation": 43,`
` "col…
-
Hi sanlike0911,
First of all, thank you for this useful node!
I have a light bulb Tapo L520E very similar to the L510E but with a color temperature of 4000K instead of 2700K.
Switch ON/OFF/TOGG…
-
My 16GB SDscard quickly filled up withe 8GB of log files, due to adding the smartbulb to one of my flows. I'm not sure of the exact issue.
Here is a small sample of the logs, literally tens of tho…
-
I've been trying to get the node up and running without much luck.
All the steps in the README go silent, without any errors, until the last step where I check the status of the server/node, then it…
-
https://github.com/davidcreager/smartthings-smartbulbs/blob/6fad3fab1686aa1edcae785b46fa912d52e488e5/smartthings-groovy/Yeelight%20RGBW%20Light%20DeviceHandler.groovy#L243
-
Hooked Phillips CeilingLamp and Phillips smartbulb. Can't get the token. Reset does not help, token all the time shows "???".
-
I'm using the latest smartthings-mqtt bridge and my lights won't turn on - they will turn off, but not on.
I commented the part of the code that intercepts "on" and change it to level. And it now …
ebfio updated
6 years ago
-
### Señala los requisitos cumplidos
- [X] Mi aplicación usa Vercel SDK AI de alguna forma
- [X] Mi aplicación está desplegada y funciona
### Escribe tu nombre o el del equipo
alejandroolme…
-
If the labels for mode select aren't set correctly you get an obscure error.... This is because I altered the ep order and now the ep in flash on mode select doesn't match my actual ep. This scheme of…