-
**Describe the bug**
From a working setup (used the device for 3 months now) , now i have a fault when loading the integration.
Failed to setup.
Removed it, restarted HA en added it again, now it f…
-
I've paired to my SmartShunt over Bluetooth and mapped /dev/rfcomm0 - but what port and/or --porttype should I be using to make this work?
-
Just noticed that about a month worth of data is missing from one of databases.
Running on `Raspberry Pi 4 4GB`
`Raspbian GNU/Linux 10 (buster)`
`InfluxDB shell version: 1.6.4`
Shards are …
-
i am using the newest version on the newest hass version.
i have a smartshunt with an original ve.direct cable connected to my raspberry pi.
when the battery runs flat the whole addon stops wor…
pvtex updated
3 weeks ago
-
## Version of the custom_component
Version 0.1.13
## Configuration / description
All configuration has been done in the UI, I have a SmartShunt and a BlueSolar (with Victron VE to BLE m…
huafu updated
3 weeks ago
-
The scooter was automatically detected. But the integration fails to set up.
The log shows this error message:
`TypeError: Too few arguments for ; actual 1, expected at least 2`
I found a similar…
-
The connection to the SmartShunt works perfectly, when I have configured the battery the connection is still available.
Then I set the aux port to starter battery and it immediately loses the connect…
-
Hello Fabian,
I have used your project to successfully integrate my new Sun Inverter, see: https://www.victronenergy.com/upload/documents/Datasheet-Sun-Inverter-EN.pdf.
I am not able to read all…
-
Hi,
More a question than an issue – in the first screen of the Victron Android app ("Device list"), the overview values that are displayed without connecting to a device seem to update a lot quicke…
DrRob updated
4 months ago
-
The smartshunt sends out new data via gatt ble protocol. I already added remaining time and starter voltage.
I need some help to decode the other values. I found these values on my smartshunt:
vic…