-
Hi, is it possible to initiate the oled.begin on pins different from the hardware i2c pins? I'm trying to use the library on a ESP32-Cam
-
In I2C.cpp file,the three GPIO Init struct should be define in class I2C.
When you creat more then one class,it will cause some problem in changeSDAState function.
And SDAPinInput struct is useless…
-
### Hardware
BGM220
### Core version
2.1.0
### Arduino IDE version
any
### Operating system
any
### Radio stack variant
No radio
### OpenThread Border Router device (if using Matter)
none
…
-
With an April/May launch time frame we think the last time that we will be able to upload software to the Pleiades satellites will be in Feb/March. To hit this window `fprime-proves` needs to:
- [ …
-
Hello!
Using Efinix version of SaxonSoC (T120F324 devkit), trying to use i2c as master to communicate with plain slave peripheral. Is there an example to communicate SaxonSoC with plain i2c slav…
-
Hello,
i'm currently struggling to get my sht30 sensor up and running. I bought [this sensor](https://www.adafruit.com/product/4099) and i'm following [this guide](https://learn.adafruit.com/adafru…
-
**PLEASE NOTE**
:warning: GitHub issues are for reporting problems with the software, tech support do not monitor these.
Our software team are smol and busy, and you will not receive a timely resp…
-
**Problem:** I'm able to use your example code to blink the connected LED when using the hardwired I2C connection. However, I am unable to make the LED blink even when using the example code supplied …
-
As mentioned in #88, I2C clock stretching in software mode is currently missing.
-
The very basic part of charging and powering works on a PI5 but not getting the battery level etc via python code no because the last known code uses RPI.GPIO. The software online is 4 plus years old …