-
all the documentation and examples only point to being able to set the Microsteps if you have hardware serial. Unfortunately my setup does not allow for using another but an arduino nano that doesn't…
-
Would be great if SoftwareSerial support could be included along with an example.
-
On some boards, not all pins can be used with the SoftwareSerial library. This is explained in the [documentation for the library](https://github.com/arduino/docs-content/blob/main/content/learn/07.bu…
-
Hello,
I have ran into a few issues using this library on Platformio, including a default argument on line 1030 in LSS.cpp and needing the SoftwareSerial library. I have noticed that there have bee…
-
Hi
I have been working on a dishwasher controller that needs two RS485 connected board to communicate. The slave board reads data from the buttons and displays data sent from the master. The master e…
-
Is it possible to change the serial port of the ESP8266 for a virtual serial port made with the SoftwareSerial.h library?
-
Is it possible to use SoftwareSerial?
I have a requirement to communicate with a serial module. While the main/hardware serial is used for debugging, need another serial port to communicate with that…
-
**I get this error:**
In file included from C:\Users\Lyric\Downloads\ESP32Marauder-0.13.6\ESP32Marauder-0.13.6\esp32_marauder\esp32_marauder.ino:28:
C:\Users\Lyric\Downloads\ESP32Marauder-0.13.6\ESP…
-
Compiling .pio\build\uno\src\PinChangeInterrupt_Led.ino.cpp.o
Linking .pio\build\uno\firmware.elf
SoftwareSerial.cpp.o (symbol from plugin): In function `SoftwareSerial::read()':
(.text+0x0): multi…
aitck updated
4 months ago
-
When I have the following snippet in my config (which I use to enable connecting to MQTT over TLS on my other ESPHome devices):
```
esp32:
board: esp32dev
framework:
type: esp-idf
```
…