-
Hi, is it possible to add AND/UND Flow cards for Huawei inverters too? Unfortunately they are available only for SolarEgde/Solax inverters.
Especially the option "Active Grid power is more than" or "…
-
### The problem
In general, I have no problems with [Solax Integrations ](https://www.home-assistant.io/integrations/solax) but one of entities is always zero:
Also, "Power Now" is always ze…
-
### The problem
The SolaX integration itself works fine but reporting to energy the energy dashboard seems to have the following error in the energy dashboard configuration that "last_reset" is mis…
-
Du meinst:
```
(nested2) hendrikn@MacBook-Pro-von-Hendrik log % evcc charger --log trace,db:error --disable
[main ] INFO 2024/10/20 16:58:32 evcc 0.130.13
[main ] INFO 2024/10/20 16:58:32 using …
andig updated
23 hours ago
-
I have automations in Home Assistant to engage loads when exported power is below 100W. My solax is in never injecting power to the grid.
I have modified the firmware of my Wifi dongle to expose th…
-
### Describe the bug
Battery 2 Temperature is 0
Checked Temp at Solax, in my case Bat2 has the same temp…
-
### Describe the bug
SolaX X3-MIC Gen 1 (MC502T*) does not show any data in Home Assistant 2024.10.3.
Short description: The exception code 0x02 tells us that the register address you’re querying …
-
### Describe the bug
"SolaX Inverter Battery Charge Upper SOC" can't be set by the SolaX Modbus Integration. After a few seconds it always falls back to the value set in the SolaX cloud app.
### Int…
-
### Describe the bug
I use the mic x3 gen2 and the x3 hybrid g4. With version 2024.09.4 everything works. As soon as I update to 2024.10.1, I don't get any more data from the mic. HA restarts don't h…
-
### Describe the bug
Hello,
Im using 2024.09.4 and trying to configure it with my growatt (via waveshare eth converter) for the first time. Initialization phase last forever, after configuring again…