-
Hi,
I continued to try using your nice plugin to display my PV value.
I fix the json syntax but still dealing with kw/kwh
I get value from mosquitto: "solpiplog/pip/acoutw = 0566" for example that …
-
Hi,
Is somebody tried to read status of the pip into domoticz through mqtt ?
Regards
-
Hello,
i have tested to create automation the whole panel of MQTT requests and it seems that the : solpiplog/pip/battdischrg and solpiplog/pip/maxcharge are not working.
I have no answer for those…
-
I am noticing that these two values are always the same
and they do not vary.
I have two 5K Kings in parallel
I also tried as recommended to link to raspberry
the two USB cables directly you have …
-
I have a system with three inverters in a three-phase configuration (one phase inverter). I installed solpiplog and by connecting the three usb cables to the raspberry I can only see one inverter, the…
-
Saluto tutti,in quanto sono un nuovo arrivato, utilizzo da più di 1 anno il software solpiplog con molta soddisfazione, ma adesso ho montato una bms daly Smart e volevo utilizzare dalylog ho già provv…
-
When I connect to my pylontech pack, the values read seem corrupted
![image](https://us…
-
I have 2 inverters in a parallel configuration.
Only the data from the first inverter gets logged to pvoutput although solpiplog shows data from both inverters comming in.
-
Hello,
sorry for the dumb question but i've found literaly nothing on how to connect the US2000 to the Raspberry. My US2000 is connected to the pip inverter with one "special" communication-wire to…
-
HI Nuno,
your app it is wonderfull!!
i have 2 questions:
it is possible to start and stop the charging by MQTT?
it is possible to move to BYPASS mode by MQTT?