-
I'd like to place whole image on the external SPI flash and to do so I've done some changes.
According to the official documentation I've added to the u-boot config these lines
```
CONFIG_SPL_SPI_S…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### The problem you're addressing (if any)
Right now flashrom will print a warning if a protected range is set, but attempt to flash anyway. This may lead to issues when updating firmware.
### D…
-
I have an image generated by the Yocto, which is in .wic format.
I want to write this image to the SPI flash via the sunxi-fel tool.
Does it possible to do so?
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Have to further investigate.
LCD always works, Flash Chip only works if LCD is not connected and LCD Driver is not activated or Flash comes first in Init. (Not yet tested if it only works on init ti…
-
hey i am useing esp32 dev module with 4mb flash storage to build the console from scratch after flashing the iso file on the display it says "SD CARD ERROR" even though connections looks good ,heres t…
-
Somehow the SPI TFT display connects IO9 to ground or 3v3. This prevents the ESP32 to enter flash boot
-
Which SPI Speed & SPI MODE values should be used when flashing the firmware?
-
With an SPI master on some TKey versions (https://github.com/tillitis/tillitis-key1/issues/213) we need some easy way of accessing SPI and the flash chip.
We will probably create a new library, som…