-
**Describe the bug**
While running the SPI loopback test for the FlexIO SPI on the NXP MIMXRT1170-EVK Evaluation Kit , the test becomes unresponsive and does not complete successfully as shown in t…
-
Tracking issue for what appears to be broken support for CONFIG_SPI_ASYNC in the lpspi driver.
`west build -b mimxrt1024_evk -p always tests/drivers/spi/spi_loopback -DCONFIG_SPI_ASYNC=y`
SPI_AS…
-
**Is your enhancement proposal related to a problem? Please describe.**
The current SPI driver transfer API has parameters for an array of struct spi_buf for transmits and another for receive.
The S…
-
hellen154hyundai_f7 board powered with +12v
```
2024-07-20_23_03_45_540: EngineState: mc33810 spi loopback test failed [first 0x800F][spi check 0x400F][COR] vBatt=12.250442512 count=1
2024-07-20_…
-
Our engineers have made initial progress in developing a driver for the W55RP20, but we've encountered a few difficulties that we would like to address with your team. Below is a brief overview o…
-
**Is your enhancement proposal related to a problem? Please describe.**
As one of the additions of hwmv2, it was added the possibility to factorize configuration (dts overlays, Kconfig fragments) for…
-
Hi there, we are interfacing the FT2232H with a slave device using pyftdi, using SPI for communication. We can write to the device, and it responds correctly on the logic analyzer. However, the ret…
-
Hi Pierre,
I was successful in using acan2517 lib on Arduino nano with MCP2518FDClick board as sender and UNO with MCP2515 as receiver. I am unable to do the same with pico development board, The p…
-
Steps to reproduce:
1. Visit https://qa-reports.linaro.org/lite/zephyr-upstream/build/636d6cd9-5277/?failures_only=false#!#test-results
2. Search on the page for "loopback-drivers-spi".
3. Behold…
-
### Boards
AMB23/SPI
### External Hardware
28J60 ethernet shield or MCP1251 CAN shield
### Hardware Configuration
Shield connected to SPI pins 12-15 due to official pinout
### Versio…