-
Is it possible to integrate this with [ESPHome Sprinkler Controller](https://esphome.io/components/sprinkler) ?
-
### The problem
When calling sprinkler.pause the valves are not always closed. This consistently happens in the following sequence:
1. Start sprinkler with sprinkler.start_full_cycle
2. Pause s…
-
### Prerequisite
- [X] Yes, I've read the readme completely.
### Cache
- [X] Yes, I've cleaned accessory cache and the issue still exists.
### Version
1.7.0. beta
### Device Infomation JSON File…
-
** In the Sprinkler Controller if no valves are enabled and you call sprinkler.start_full_cycle action then the controller will enable all values and run a full cycle. Would like this to be option…
-
Hi Robert,
I like to group certain sprinkler zones by sequences (alternatively individual controllers) since it gives a better visual overview, and also allows me control those sequences (or contro…
-
### The problem
ESP32 crashes and reboots when running a cycle. I ran the same YAML on an ESP8266 based board and get the same crash/reboot while running an irrigation cycle.
```
[18:46:56]Guru…
-
{
"active_time": 1617181951,
"biz_type": 18,
"category": "sfkzq",
"create_time": 1617181951,
"icon": "smart/icon/ay15214434623795XWwK/6463a64d46738ad853f7209b11eaac9…
-
### The problem
As stated in title, when no valves/zones are enabled (presumably because the user does not want them to activate for some reason) and the main switch is activated (which could be caus…
-
**Describe the solution you'd like**
It would be nice if a zone was able optionally able to track water usage, as many sprinkler controllers or hose end controllers that can integrate with home assis…
-
The best option for irrigating the lawn is to do deep and less frequent irrgation sessions, in the early morning.
So, as an example, instead of wattering for 10 minutes every day it's better to wat…