-
Bei Verwendung des Partikelsensors SPS30 wird der gleiche Messwert für PM1, PM2.5, PM4 und PM10 angezeigt.
![SPS30](https://user-images.githubusercontent.com/89256502/130232925-a914d9fe-d097-4834-a…
-
Habe einen SPS30 Feinstaubsensor hier und einen NodeMCU V2.
Angeschlossen ist er wie hier empfohlen :
Pinout: 1 2 3 4 5
Pin 1 (5V) -> Pin VU/VIN
Pin 2 (SDA) -> Pin D3 (GPIO0)
Pin …
-
Could you provide a working example of using the sps30_sleep() function? Here is what I tried to do:
```
#include
#include
#include
void setup()
{
int16_t ret;
uint8_t auto_clean_d…
-
### Describe the bug
Trying to read specific values from sps30 (https://sensirion.com/products/catalog/SPS30/) sensor leads to kernel panic:
[ 105.317088] Kernel panic - not syncing: stack-protec…
-
the SDS011 sensor operates (default) only a short time every 150 seconds. This is to increase the lifespan of the sensor. I recently installed a SPS30 sensor using a NodeMCU ESP8266. The SPS30 seems t…
-
**Describe the problem you have/What new integration you would like**
I was able to successfully implement SPS30 Particulate Matter Sensor.
https://esphome.io/components/sensor/sps30.html
Fi…
-
Frage zum SPS30 :
Am Anfang wird einmalig mit sps30_start_measurement() der Sensor gestartet (Lüfter an, und die Messungen laufen im Hintergrund mit 1/s).
Dann wird alle 11 Sekunden (SPS30_WAITING_A…
tom-r updated
3 years ago
-
### The problem
Can't get ESP32 to get the SPS30 sensor firmware version, therefore SPS30 device can't be initialized.
I tested this SPS sensor on i2c with an Arduino Uno board and it works without …
-
### The problem
Hi
I updated ESPHome. I did not do update for year or more.... I decided to update my ESPHome and recompile my NodeMCU's.
After this step SPS30 doesnt work any more.
[1…
-
**Describe the problem you have/What new integration you would like**
Hello, could someone look at the other functions in the datasheet for the SPS30 dust particle sensor.
- enable sleep/idle mo…