-
Dear tsattler and v-pnk,
First, I would like to express my admiration for your impressive work on the MeshLoc project. As a researcher working on visual relocalization, I find your project to be incr…
-
- Arduino board: **Arduino Nano Every**
- Arduino IDE version (found in Arduino -> About Arduino menu): **1.8.12**
- List the steps to reproduce the problem below (if possible attach a ske…
-
I replaced the Nano with a Nano Every and get the error messages listed below when compiling Main.c. Is the Nano Every with its 4809 so different than the Nano with the 328. Yes, some pins have differ…
-
i try your git tree on qemu, but it cannot go into shell, here is log:
starting xv6 for ARMv8...
Implementer: ARM Limited
Current EL: EL1
Flushing TLB and Instr Cache
Setting Memory Attribute I…
-
Hello, nice job!
The arduino's current hardware library has a 16-bit transfer routine. Would it be possible to add this routine to the library via software?
This seems to be the original code (A…
-
I've been evaluating the Cortex A53 port for both the SMP and non-SMP ports and it appears to me that the SPSR value pushed into the stack frame does not set bit 0 which causes the stack pointer to se…
-
Hi,
this is just a complaint about the logic in the code. It is likely that right now this does not have any real-world consequences:
Looking at the [avr/drivers/spi_master.c spi_start() funct…
-
For each of the following registers we should confirm:
- What the access rights are for EL0 and EL1,
- What the kernel does in EL1 or EL2 for access control:
- Saved and restored in object s…
-
SPI.begin must be call even in the SPI library with " transaction" included in the Arduino IDE 1.8.5.
See that example : https://www.arduino.cc/en/Tutorial/SPITransaction.
A good place to include it…
-
Hello,
I have been trying to use this library for the newly Arduino Nano Every, which has an ATMEGA4809 chip.
The new megaAVR-0 series have different registers than the "classic" AVRs found on the…