-
I have an SSD1325 OLED display, which according to the data sheet can handle (16) levels of grayscale. This is not entirely clear to me because the original u8glib could control 4 different shades of …
-
I am using the Espressif ESP32-DevKitC V4 development board with a 2.4-inch OLED display. In my project, I am utilizing the U8g2 library to control the display. However, I have encountered screen corr…
-
followup for: https://github.com/olikraus/u8g2/issues/735
```
u8x8_cad_ssd13xx_i2c Put a I2C start/stop around each command and each argument --> many start/stop commands
u8x8_cad_ssd13xx_fast_…
-
When running pi_logo.py from the examples I get the device info but the screen show for 5/6 static noise and only showing from the top a part (1/6) of the raspberry pi logo scrolling right to left?
I…
-
Hi, does this work with the BeagleBone Black board?
-
I saw in the list of supported Oled displays that SSD1327 is supported but it is not mentioned if it is SPI or I2C.
Also what code number should be used to enable it sys.lcd("x")?
thansks
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…