-
```sudo ./build_and_run.sh -p linux -f demos/ssd1331_demo
make: Entering directory '/home/servadmin/ssd1306/examples'
make -C ../src -f Makefile.linux MCU= SDL_EMULATION= \
AD…
-
Hi all,
I see that very far away, people sell [65k color OLED 96x64 display](http://www.ebay.fr/itm/0-95inch-RGB-OLED-A-SSD1331-96-64-Resolution-65K-Colorful-Horizontal-Pinheader-/251859806533) ([or …
-
I'm using the last version from git with arduino 1.8.9 on ESP32
```
#define sclk 18
#define mosi 23
#define rst 26
#define dc 27
#define cs 25
#define miso 19 // unused except for HWSPI …
-
I am planning to make a media player type device using an Arduino and need a SSD1331 96x64 color OLED implemented and the MCP4725 is a 12-bit DAC for audio output. I don't want to lug around an Arduin…
-
Right now I'm exclusively using the SSD1331 low-level line drawing function for the OLED display. When I attempt anything more complicated the first page (horizontal section/row) of the OLED works fin…
-
Please post a link to the library which is working with this example.
-
Hello,
I'm trying to show the power supply voltage on a LilyGo T2 v1.6 with a ssd1331 display and a sd card device on board. I tried several examples from the internet and none of them worked. I ass…
-
- Arduino board: Grand Central M4 Express
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.19
- List the steps to reproduce the problem below (if possible attach a sketch or…
-
I own a SSD1331 0.95inch RGB OLED from Waveshare (resolution 96x64, RGB, 65K colorful, [specifications here](https://www.waveshare.com/wiki/0.95inch_RGB_OLED_(A)).
I have been able to find how to con…
-
Found DIM mode commented out. Tested with it re-enabled and it worked but found changing to NORMAL didn't recover from DIM mode.