-
ESP works, but clock shows time from power on, sometimes it shows 00:00
-
Hello.
I want main.hex and eeprom.hex file that I can upload to MCU.
I have STC15W404AS Chip in the pcb. I do not have knowledge to use compilers.
I use the STC-ISP program v6.86U
Thanks.
-
Can one compile this firmware so that the clock displays only time and nothing else? Time + autodimming only; no date, temperature etc.
My version has STC15W404AS
-
Again I am to you, but with a specific request. You can change the firmware so STC15W404AS the functionality is:
55 seconds displays the current time in 24 hours format
5 seconds displays temperat…
ghost updated
5 years ago
-
Hi!
Synchronization of time with the GPS receiver conclusion of consecutive data of NMEA.
Prompt what GPS receiver to use and where to connect on the scheme of hours?
ghost updated
4 years ago
-
Hi there,
looks like their might be a new hardware revision from banggod again (or I am doing something wrong).
The clock mostly worked with the original firmware, but was flickery.
Flashing th…
-
[SKU593344 光控工控YD010(英文）.docx](https://github.com/zerog2k/stc_diyclock/files/1858988/SKU593344.YD010.docx)
I've one of this could you please tell me if it's supported?
Bought here:
https://it…
-
Thank you so much for developing this tool!
I am having a little trouble getting it to work with a STC15L2K32S2 with a PL2303 on OSX. It appears to detect the chip correctly:
```
python3.5 stcgal.py…
-
Hello, I've read through the other two issues with no luck, but it is my first time trying to flash an STC chip:
Archlinux with 2 FT232 FTDI USB TTL adapters (1x adafruit FTDI 5v, 1x Aliexpress 5/3…
-
So I tried anything I possibly could with stock chips - no luck. Ordered a set of new both STC15W404AS and DS1302 - actually like 2 of STC and 10 of DS1302. Put a new set in, flashed STC - worked for …