-
When executing make in boards/ek-lm4f120xl$ make, I get the following error:
```
/usr/local/projects/univ_ucc/projects/vlf2/gnu_based/stellaris-master/boards/ek-lm4f120xl$ make
make[1]: Entering dire…
-
As written in elua4stellarisLauchpad/src/platform/lm4f/IMPORTANT.TXT, the following files are project specific:
./conf.lua
./conf.py
./flash_conf.h
./lm4f.ld
./lm4f_pio.c
./platform.c
./platform_conf…
-
From #270 7 months ago:
> lm4flash will be replaced by OpenOCD in the next rev. Unfortunately there is nothing I can do at the moment about the lm4flash included in Energia 0101E0010. As an interim s…
-
Debugging used to work with previous version of Energia but no longer works.
I don't understand the `Error: gdb requested a non-existing register` message.
- **Configuration**
LaunchPad LM4F120 and…
-
Using Mac OS X 10.7.5, I can get power to Stellarpad via USB cable but the Serial Port under Tools is greyed out. Unplug Stellarpad and plug in MSP430; change board selection to MSP430; serial port s…
-
Using I2C port 1 and SPI port 2 simultaneously doesn't work on the StellarPad.
I2C port 1 is unresponsive when MOSI and MISO from SPI port 2 are connected.
The only solution is to use another I2C …
-
Hello,
i have tested the cdc example for the stellaris-ek-lm4f120xl board under Windows. When i plug USB the device gets enumerated (with a patched inf file) and all seems good. But when i try to open…
Garag updated
10 years ago