-
**What you want to do**
与STlink的链接正常,且编译正常但是烧录失败,请问该怎么解决呢
**Describe the problem**
VScode报错
Error: Unable to list supported devices
Error: Cannot identify the device
**Expected behavior**
!…
-
Hello.
I have a problem with BDsensor after flashing STLink. I receive error 10.24. I updated the firmware according to your instructions. Before the upgrade, BDsensor worked ok. Still 'No data from …
rety4 updated
1 month ago
-
i am using stlink clone with stm8s103 development board from quiet long time. But few days back my st-link got damage due short i think. so i am using new clone.
Now i am getting error as "Tries Exc…
-
Этот репозиторий является форком https://sourceforge.net/p/stm32flash/code/ci/v0.5/tree версии примерно v0.5?
Утилита stm32flash рассчитана на программирование через UART.
Более новые отладочные п…
-
Hey everyone!
I'm trying to flash using a 36V TSDZ2 with XH18 display. The program seems to compile just fine but I am not able to get it to flash.
![Screenshot 2024-08-11 143102](https://githu…
-
is necesary change this lines ?
`# Uploader tool
# -------------------
# blackmagic probe upload
tools.bmp_upload.cmd=arm-none-eabi-gdb
#tools.bmp_upload.path={runtime.tools.arm-none-eabi-gc…
-
- [x] I made serious effort to avoid creating duplicate or nearly similar issue
In order to allow developers to isolate and target your respective issue, please take some time to select the check b…
-
nrf-recover doesn't work with STLinks. However pyocd can do it just fine, so it should be possible. I'm using a stlink v2 clone.
Error It isn't possible to recover with a ST-Link
-
Type: Bug Report
**Describe the bug**
- OS and Version: Manjaro 23.0.1
- VS Code Version: 1.82.0
- Embedded Tools Extension Version: v0.7.0
- Target embedded device: STM32L476
- RTOS v…
-
Alright so me and @coyt have tried this and verified the problem. We both are using ST-Link V2 clones from [Amazon](https://www.amazon.com/DAOKI-ST-Link-Programming-Emulator-Downloader/dp/B01EE4WAC8/r…