-
**Steps to reproduce:**
- Download the project https://github.com/mirao/stm32f4discovery/tree/master/stm32cube-printfOverUSB_UART
It's a demo of "printf" over UART on STM32F4 Discovery. It's using…
mirao updated
4 years ago
-
Hello!
**Versions**
- STM32CubeIDE 1.10.1
- STM32Cube MCU Package for STM32H7 Series 1.10.0
**Problem**
I tried to compile the STM32H743_Nucleo_ETH example but it causes an warning duri…
-
```
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/ststm32/STM32F107VC.html
PLATFORM: ST STM32 (15.6.0) > STM32F107VC (64k RAM. 256k F…
-
Hey,
it is possible to enter an older Add token than an entered Set token in the C implementation. I figured out that the MarkCountAsUsed() function is not working properly.
The macro CHECK_BI…
-
ST Microelectronics provides an STM32Cube "Expansion Package" named [X-CUBE-STL](https://www.st.com/en/embedded-software/x-cube-stl.html) which includes a safety manual, FMEA for the MCU, failure rate…
-
Up to ststm32 version 9.x there was no need for a `product_line` field in the `board.json`. This changed with version 10. The value is needed to get the right linker file and includes. However, the va…
-
**Describe the set-up**
* STM32F3Discovery.
* STM32CubeIDE.
**Additional context**
Please add support for a BSP package for I3G4250D. Thanks
-
PLATFORM: ST STM32 (11.0.0) > STM32F030C8 (8k RAM. 64k Flash)
HARDWARE: STM32F030C8T6 48MHz, 8KB RAM, 64KB Flash
DEBUG: Current (blackmagic) External (blackmagic, cmsis-dap, jlink, stlink)
PACKAGES…
-
I cant seem to be able to compile the firmware with vs code. i get a "Warning! `env_default` configuration option in section [platformio] is deprecated and will be removed in the next release! Please …
-
Unless I've missed something, there is no mention of support for STM32H5 series chips. Is there a reason for this or has it simply not been a priority? I've got a couple of boards using STM32H5 chips …