-
QEMU at least 6.0.0 version has platform 'netduinoplus2' support based on stm32f405-soc
-
Hello,
I have configured the driver for an ILI9488 display and SPI. However, when I turn on LCD_DMA_TX I get the error:
/Core/Src/Lcd/lcdts_io_xpt2046_spi_hal.c:491:23: error: 'LCD_SPI_HANDLE' u…
-
Hi,
The Mellow Fly Gemini board (https://s.click.aliexpress.com/e/_DDNALgT) Is a hybrid linux SBC and printer controller board. I think it's the perfect candidate for a linux CNC implementation for…
-
Hello Bodmer,
I have now tested a few things, without DMA all is working fine but slow.
Tests with the `DMA Example --> boing_ball` were not successful.
The grid is showing but the ball not.
Whe…
-
Hello,
With your STM32F405 Feather Express card, the PB12 pin (cardDetect) is always to 0 (GND).
This is due to a short circuit with the card reader double pin 10
![cardReader_STM32F405-Feather-E…
-
### Operating System
Windows 10
### INFO_UF2.TXT
```
TinyUF2 Bootloader 0.9.4 - st/cmsis_device_f4 (v2.6.4-1-g2615e86) st/stm32f4xx_hal_driver (v1.7.9) tinyusb (0.12.0-203-ga4cfd1c69)
Model: Adaf…
-
Hello David
According to your STM32F405 hardware, I designed a circuit board. The serial port is good , commands can be used, such as get /measure, etc., but when measuring resistance and inductanc…
-
Is this working with a stm32f405 ?? please
-
The rusEFI firmware compiled for Prometheus-405 doesn't run normally on STM32F405 (See https://rusefi.com/forum/viewtopic.php?f=4&t=1506)
The CPU is in permanent reboot mode (non-dependent on the cod…
-
Is there a MecrispCube.ioc file for the STM32F405 (mentioned in the README)?
Rich