-
Hello.
First of all, thank you for this incredible project. I am interested in assembling this project on my protoboard. I have doubts about the microcontroller. Can I invest in the STM32F411 model (…
-
What configuration did you use in the STM32 .ioc file? I can't get it to work with your code...
-
Hi.
I made some tests with BlackPill (411, firmware from Web Builder) connected to two generators, one 3200 Hz as pulses, and second 1 Hz short pulses as index.
I surprised the G33 (and G76 too) wo…
-
Hi all,
I think it's better to make a new issue for that port. Currently I stopped with the Due-port.
Anyhow, the first progress is done. Serial works and I start to simplify it.
I delete the mbed-…
-
Hi,
Is there any schematic or pinout detail for ADS1298 in this project?
I noticed that ADS_DRDY == PC13, ADS_CS == PA4, SPI == SPI1. What about CLK and other pins?
I'm trying to find references fo…
-
Hi there,
Thanks for all the work in putting this together, very clear code & instructions. I am trying to use this lib on an STM32F411 (Nucleo STM32F411RE) and the output signal is incorrect:
!…
-
There seems to be some confusion about the WeAct 3.0 board.
On this page (and a lot of other places):
https://stm32-base.org/boards/STM32F401CEU6-WeAct-Black-Pill-V3.0
it says V3.0 has the ST…
-
Hello all!
i was trying to compile the netmf for nucleo f411 (STM32F411RE), i've modified the platform_selector.h with all the info from datasheet.
i've builded all with gcc 4.9 and got thinibooter.he…
-
branch: dev
Issue: same as 181
https://github.com/NETMF/llilum/issues/181
Cause:
https://github.com/NETMF/llilum/commit/d2669ec0250a957e7dfc1240eeadfebc03bb05ef
lt72 committed on Mar 5
Zelig/Board…
nbsn2 updated
7 years ago
-
firstly, thanks for your work on this subject.
I was looking to replace the PCM5102a with a better dac. I noticed that the STM32F411xE configuration could provide the masterclock. what would the fre…